Hallo Johannes,
bitte korrigiere meine Aufenthaltszeit. Ich bleibe diesmal wieder bis Sonntag
Gruß
Rainer
XVIII. Geithainer PC/GEOS-Treffen 2019 - vom 14. bis 17. November 2019
-
-
erledigt
-
erledigt
Today it starts!:) See you tomorrow afternoon!
Hans -
Die ersten sind da.
-
Hier findet Ihr nach und nach ein paar Bilder vom 18. Syhraer Treffen 2019.
-
Hallo zusammen.
Ich wünsche euch ein ganz tolles Treffen mit viel Spaß und noch mehr (Whiskey)-Kuchen.
Und vielleicht gibt es so ganz nebenbei auch noch etwas Neues. -
Danke Achim
Du fehlst hier -
Der Artikel von René ist tatsächlich auf Heise.de erschienen.
-
Sehr schön, das ist toll geworden, vielen Dank auch an René dafür!
Auch wenn nur kurz, war es wieder schön am Treffen dabei zu sein. Danke an alle Teilnehmer und vor allem an die Organisatoren!! Ich freue mich schon auf das nächste mal...
Viele Grüße,
Falk -
Der Artikel von René ist tatsächlich auf Heise.de erschienen.
Wirklich guter Artikel, und dann auf einem so prominenten Portal. Wenn man die Diskussion zum Artikel liest, sieht man das PC/Geos auch heute noch vielen ein Begriff ist. Vielleicht entdecken es ja einige wieder für sich.
MfG
Jirka -
Sehr schön, das ist toll geworden, vielen Dank auch an René dafür!
Auch wenn nur kurz, war es wieder schön am Treffen dabei zu sein. Danke an alle Teilnehmer und vor allem an die Organisatoren!! Ich freue mich schon auf das nächste mal...
Viele Grüße,
FalkJa, danke an alle und die Orgis !
Und war schön, daß du auch wieder einen Abend da warst, Falk! Das machte das Treffen noch etwas runder – und bringt den SDK-Programmierern ein paar Tips . -
Ja, danke an alle und die Orgis !
Und war schön, daß du auch wieder einen Abend da warst, Falk! Das machte das Treffen noch etwas runder – und bringt den SDK-Programmierern ein paar Tips .
Thank you very much, for a very nice meeting! Thank you Johannes
for organizing the meeting, and Franziska with your assistents for the
excellent food. It was really nice to meet with Falk and being picked up
at the station. Thank you Frank and Sebi for helping me with the key
and the Mühle. Thank you Wolfgang for the rally ride to the Mühle and to
Syhra, likewise Sebi and Frank for the much calmer ride to the Mühle
and Syhra. I will remember the nice breakfasts at the Mühle with Rainer,
Frank, Sebi and Wolfgang, even if I didn't sometimes understand a word.
Thank you Konstantin for the constantly verbally pinching about the
GlobalPC, and for the nice ride to the station in Leipzig, you actually
let me off at the right place in Leipzig! It was nice talking to you
Ulrich about your fantasic milling machine, GeoCosmos and Fleischmann,
Goldy (with wife) about the libraries of the e-books, Rainer about
R-Basic and your presentation of the game you created, Wilfried, it was
nice to see your cool work with the ruler library and GeoCad, Bolle, you
helped me with stacks=0, and finally Jens, you broke my work with the
Global PC, when you disconnected the switch (joke) Anyway, it was
nice tallking to you about my Raspberry Pi, and everything else. I hope I
did not forget anyone now? Anyway, I really appreciated attending the
meeting, and it is only 364 days left until the next one. I hope to meet
you all there again, and sleeping at the cold Mühle again. Wolfgang, we
need to buy them some braunkohle for the heating, the next time, as it
apparently is our problem that it was cold there.
Also,
I won't forget the bavarian meatloaf I had at the restaurant at
Schönefeld, it looked like Swedish Falukorv, and it tasted the same, so
now I know that Falukorv (sausage from the town of Falun) is a copy of
bavarian meatloaf!Auf wiedersehen!
Hans -
Ich habe das Aussehen der Ruler mal verändert (wie während der GeoCad-Vorführung angesprochen). Wäre das so besser?
-
Ja, die Lineale sehen nun klarer und schöner aus :-)!
-
Super! Sehr viel besser!
-
Die Goldmaenner's sind wieder zu Hause (komplett mit Frau !!!) :D[size=10] [/size]
Vielen Dank fuer die tollen Tage, es war wieder vom feinsten. Ich freue mich schon auf das kommende Jahr.
Tack till Hans från Sverige
Jens
-
Die neuen Lineale sehen genial aus, Wilfried!!!
Ich hoffe, dass die Library bald freigegeben werden kann! -
Frank hat auf seiner Seite die Vortäge online gestellt.
Danke -
Auf meiner Seite habe ich versucht die Ergebnisse des Treffens zusammen zu tragen.
-
Mit einer Freigabe der veränderten Ruler-Library wäre es nicht getan: Alle Applikationen, die die Ruler nutzen, müssten neu compiliert werden.
-