   Program package "ArtSCom" is intended for increasing the communication
possibilities of  HP OmniGo100/120 .  By means of this package You may
send and get an e-mail, as well as send fax.
Package has  intuitive-comprehensible and useful  interface, relieving
creation an editing, viewing the messages,   You simply needed to move
over to the folder "OutBox", install a marker on the interested message
and press the button "Deliver" for sending  fax.

	1.Your attention is presented by version 1.0 of package.

1.1.This version allows:
* to  create and edit  messages in built-in text editor in the mode "WYSIWYG";
* to use OmniGo phone-book application for addressing
(fax number is chosen from the field "FAX", electronic address - from the
field "OTHER");
* to send facsimile messages;
* to send(forwarding, replying) and receive e-mail messages;
* to use any external or PCMCIA HAYES-compatible fax-modem,
supporting protocol CLASS2 at speeds up to 14400 bd, for fax sending.
* to use any HAYES-compatible modem, for mailing;

1.2.This version has the following restrictions:
* size of fax - not more than 2 A4 pages;
* on a OG100 is not recommended for creation faxes to use a font "Sans"
(it impossible to use sizes 12 and 14 of this font, because  they have not 
outline format);
* the time of not registered version is limited, on expiration of certain 
time will not be working;
* not support remote mail;

	2.Configuring your modem.

ArtSCom's default modem settings may be not properly work with your modem. See
the manual for modem and set correct commands for "Init.string" and "Hangup 
string" fields in "Modem's Setup" dialog box. For example, command  AT&F  
may be necessary to change with ATZ or  ATZ0, and hangup string may have  
to change with ATH0.
Because of Omnigo's serial port not support DTR/DSR signals,   may have 
appear connection problems with some types of modems.In this case, add to 
"Init.string" sequence &D0&S0(or the same that your modem understand) 
to override DTR/DSR operations. If your modem have DIP-switches (such 
as USR Sportster 14400), please check, that some from them is intended 
to control DTR operation. In this case, please set this switch in "Ignore DTR" 
position too.
If you use 3-wire cable, or, for some reason, you want to use "Software 
flow control", add to "Init.string" sequence "&H4" (or the same that your 
modem understand). Of course, you must change "flow control" to XON/XOFF 
in "Line Settings" dialog box.
Note, that some modems can't works with  serial port  on 14400 bps, if your 
modem can't, please  check "Baudrate" in  "Line Settings" dialog box.
 
During delivering process ArtSCom generates error sound when serial error 
occurred. This happens may be because Serial Port's baud rate is too high 
for OmniGo or serial port's and modem rates not justified. It's recommended 
to set a serial port's baud rate no less then modem's connection rate. If you 
use a compression protocols (like MNP5 or V.42bis, usually default factory 
settings) it's a good idea to set the serial port's rate higher then modem's 
rate.


	2.Configuring e-mail.


First, to deliver the Internet mail using this software your Internet service 
provider must supports PPP(Point-to-Point protocol).

The following designations are used below:
path - Sequence of transitions;
(..) - Section, outlined screen area;
[..] - Button or Menu item.

You must fill following information needed for delivering e-mail:

Main path:[Setup]->[E-mail setup]->

Path:(Use the following profile)[Edit entry]->[Personal Information]

 - Full Name(This string will appear in the mail headings that you send)
 - E-mail address (e-mail address of your mailbox)

Path:(Use the following profile)[Edit entry]->[Mailbox Information]

 - Internet mail server (POP3 server name or IP address)
 - SMTP server (you fill this field if SMTP and POP3 server have different 
	names)
 - Account name (Type your POP3 e-mail account name)
 - Password (Type your POP3 e-mail password)

Path:(Dial using the following connection)[Edit entry]

 - 1 phone number(phone number of your Internet service provider, including 
	prefix and suffix if they need)
 - 2 phone number(other phone number of your Internet service provider)
these numbers will change each other if phone line was BUSY

Path:(Dial using the following connection)[Edit entry]->[Login As..]

 - User Name(Type your PPP account name)
 - Password(Type your PPP account password)
Click nessesary check-boxes:
 - Bring up terminal win., after dialing (if non standard logon script is used)
 - Standard login script(if standard UNIX logon is used)
Clear all check-boxes if you connect with PAP autentication protocol only
 
Path:(Dial using the following connection)[Edit entry]->[TCP/IP settings..]

Click or clear check-box:
 - Server assigned IP address
If selected, ArtSCom will accept an IP address from a PPP server. 
If not selected, type the preferred IP address for this connection
in the field:
 - Set IP Address 
ArtSCom will try to use this address. 

Click or clear check-box:
 - Server assigned DNS
If selected, program will accept DNS server addresses from a PPP server. 
If not selected, type one or two DNS server addresses to use for this 
connection in the fields:
 - Primary DNS
 - Secondary DNS 
ArtSCom will try to use these addresses.


Path:(Transferring e-mail)

 - Use remote mail(clear this check-box, not supported now)
 - Write Logfile(if problems appears in mail delivering  please click this 
	check-box and try to produce short mail session, two files email.log 
	and ip.log which will appear in directory EXCHANGE you can send us to 
	solve your problems)
 - receive [NN] lines of any message(type number of lines or 0(zero) if you 
	want retrieve whole message)
 - Remove received mes..(clear this check-box if you don't want delete received 
	messages from mailbox)
You can use different profiles for mailbox and connection to Internet provider.
To add new profile press button  [Add entry] corresponding to necessary section.
To delete  profile - press [Del entry]



	3.Remarks on installation and de-installation package.

Your "OmniGo" must have  near  160Kb of free space.
Program creates the  following structure of sub-directories in
directory DOCUMENT:

EXCHANGE -------|
		|------INBOX
		|
		|------OUTBOX
		|
		|------SENBOX

   You will need manually  delete this structure for full  de-installation of
the  package.

	
	4.Registration of program

4.1 At first program works in demo mode and you may use it for two week 
after installation. After  test of program, if you are satisfied,
you must register program in ArtSoft by sending, beforehand  filled, 
the Registration form by e-mail or fax. Please Note, Omnigo Owner field 
must be exist, because User ID, that created automatically, are based on it.
    After payment  for program, you will receive an e-mail from ArtSoft 
with "activation number", which you must type in activation dialog, that
appear if program was not registered, when you try to send a fax or delivering 
a mail.
    Please save your "User ID" and "activation number" because, if for 
some reason, you will change the OmniGo Owner field in Setup application 
then ArtSCom will go to demo mode(work for two week), In this case,
please send us old "User ID", "activation number" and new "User ID".
You will receive new "activation number" from ArtSoft to activate program again.

4.2    P R O D U C T   R E G I S T R A T I O N
                      F O R M
 First Name:
 Last Name:
 E-mail address:
 Country:
 City:
 Phone:
 Omnigo Owner (from SETUP/Owner/This unit
 belongs to):
 User ID:


       4.License agreement.

This is a legal agreement between you (either an individual or a
single entity) and ArtSoft, Ltd. ("Manufacturer") the manufacturer
of ArtSCom v1.0 ("Software").

ArtSoft Ltd., whose address is 1st-Buhvostova 12/11, ArtSoft,
Moscow, Russia 107258, hereby grants to you a non-exclusive
license to use its accompanying software product ("Software")
on the following terms:

	You may: use the Software on any single computer for two 
week after installation for research and development, testing, 
demonstration, or any other non-commercial use; copy the Software 
only for archival purposes.

	After  test of program, if you are satisfied, you must register 
program in ArtSoft by sending, beforehand  filled, the Registration
form by e-mail or fax.

	You may not: use the non registered Software after demo-period; 
use the Software for any commercial purposes, modify, translate, reverse
engineer, decompile, disassemble, copy the Software or Documentation 
(except for back-up purposes); rent, lease, transfer or otherwise transfer 
rights to the Software; or remove any proprietary notices or labels 
on the Software or Documentation.

Title, ownership rights, and intellectual property rights in and
to the Software and Documentation shall remain in ArtSoft and/or
its suppliers. The Software is protected by the copyright laws and
international copyright treaties. Title, ownership rights, and
intellectual property rights in and to the content accessed
through the Software is the property of the applicable content
owner and may be protected by applicable copyright or other law.
This License gives you no rights to such content.

You acknowledge and agree that the Software is not an official
product, that has been commercially released for sale by ArtSoft;
the Software is not in final form and may contain errors, design
flaws or other problems.

THE SOFTWARE IS PROVIDED TO THE END USER "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF
NON-INFRINGEMENT, MERCHANTABILITY, AND/OR FITNESS FOR
A PARTICULAR PURPOSE.  THE ENTIRE RISK OF THE QUALITY
AND PERFORMANCE OF THE SOFTWARE IS WITH YOU.
ARTSOFT OR ITS SUPPLIERS SHALL NOT BE HELD TO ANY
LIABILITY FOR ANY DAMAGES SUFFERED OR INCURRED BY THE
END USER (INCLUDING, BUT NOT LIMITED TO, GENERAL, SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES INCLUDING DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS
OF BUSINESS INFORMATION AND THE LIKE), ARISING FROM OR IN
CONNECTION WITH THE DELIVERY, USE OR PERFORMANCE OF THE
SOFTWARE.

Manufacturer is ArtSoft, 1st-Buhvostova 12/11, ArtSoft,
Moscow, Russia 107258.

Contacts : info@artsoft.ru

Copyright (c) 1997 ArtSoft, Ltd.
